To perform a Hard Reset on Explay Informer 702 you need to know a few basic rules. This instruction will help you with this. We will definitely tell you the sequence of actions to perform a hard reboot. Remember that this procedure completely clears the memory and deletes all settings. It is best to remove the memory card from the phone before starting the process so that it is not damaged. Because this can also lead to the loss of external memory.
1. The tablet must be turned off.
2. Press the "power" and "volume up" buttons simultaneously.
3. This combination should be held for several seconds until the download begins.
4. The Android symbol should appear on the screen.
5. To launch the service menu, press the "home" button.
6. In the menu that opens, you need to select wipe data/factory reset. This will begin the reboot.
7. You need to confirm by selecting yes delete all user data. You can activate it with the power button.
8. While the system is rebooting, you need to wait.
9. When the reboot is complete, the menu that was at the beginning will appear. But you need to select reboot system now, this will start the system in normal mode.
Don't forget about the reasons for failures that cause the need to do a hard reboot. Basically, these are various viruses that you download onto your device along with programs from unverified sites. The cache should also be cleared regularly. Apps and the Internet should be used with extreme caution.
Disadvantages: The main disadvantage of the tablet is the battery. Enough to watch a movie on the way to work or read for half a day. Those. I have to charge it every day. If you want to read a lot, then it is better to take an e-reader with electronic ink. It charges once a month (if the screen is Pearl). And good for the eyes. Here, even with THIS screen it’s a little hard. This is how long it takes to read from a monitor. The protective film is glossy!!! Those. if the film is dark, you see yourself and everything around you as if in a mirror! The cover is disgusting to the touch, reminiscent of rubber. Android version 2.3 is installed on the tablet. This is more than enough for everything. But you can install version 4.03. Everything is on the EXPLAY website. To install it I had to dance with a tambourine. The instructions are a little inconsistent. First you need to install the program for flashing. Then update it. Update files in the software folder. Then be sure to install the drivers. They are in the drivers folder in the same update program. Moreover, you need to install the drivers with the tablet connected but turned off. When connecting a wire, a message about an unknown device will appear. Specify the path to the folder with drivers. If the drivers are not installed, there will be no update. Follow the instructions further. (hold down + and Power) Everything was updated in 2 minutes. In Android 4, videos in mkv format cannot be read. I had to install the video player MX Player. Everything worked. I advise everyone to install this player. Incredibly comfortable. Just swipe your finger in different parts of the screen and adjust the brightness, volume and scroll through the movie. I tried about ten different video players, this one is the best. The vibration response in the settings cannot be turned off in any way. Annoys. But thanks to the separately downloaded Android Assistant program, the vibration was removed. Thanks grav1957. It takes a long time to charge. Three or four hours. Those. longer than it works. The headphone input is not well located. If you hold the tablet in your right hand, the headphone jack interferes with your hand. The power button is located at the bottom and if you place the tablet on the table on its edge, it turns itself off.
Advantages: I bought it for 4990 rubles in Svyaznoy. I ordered free delivery from the terminal directly to the store. Moreover, the store already had this model in stock, but for 6990 rubles. Only 2000 rubles difference. It turns out that Svyaznoy has begun competition for online commerce. And keeps prices low if you order. So don’t take it right away, but order delivery to the store. What is the most important thing in a tablet-reader-watcher of films? 1 Screen. 2 Battery. 3 Weight The screen for this price is just a fairy tale. IPS matrix. With a large margin of brightness and contrast. (usually works at 30% brightness) With large angles. Greater image clarity. Bright colors. Compared to a reader for 3000 rubles with a color screen, it’s just an eye killer. There is a dim, blind, fuzzy image, visible only in the dark. You can read here even if you are sitting in a minibus next to the window. There is no battery in the tablet. Enough for one and a half films. And this is the main disadvantage of the model. I'm thinking of buying an additional external battery the size of half a phone. There are such. The weight of the tablet is good (350g). Compared to some other models, it's simply lightweight. It's also quite thin. The RAM and speed of the stone are more than enough. Nothing slows down. Everything flies. An anti-scratch film was immediately applied. There is a cover. Quite loud speaker. An excellent reading program, Cool Reader, has been installed. In my opinion the best. Swiping your finger across the left side of the screen adjusts the brightness. Very comfortably. A million settings. Understands all formats. The video does not slow down and understands the mkv format. Charges from the computer. Some tablets can only be charged from the power supply. (For example IconBit).
Conclusion. A very decent device for the price. If you compare it with color readers for almost the same price, then it’s just a godsend. At first I thought of buying an IconBit NETTAB MATRIX, a better battery, less weight and with the same screen, but there is no film or case. But you still need to take a matte film. So there's something to think about. The Explay 702 tablet is a very good choice for the price. Everything works as it should. And almost everything except the battery is at the level of expensive tablets. Good technical support. If so, there will be no problems. I recommend.
In this case, charge it for a couple of hours. Then, hold the off button for 15 seconds (or press reset). Wait about 15 minutes for the tablet body to cool down (the back cover may get warm while charging). Now try turning it on (3-5 seconds on button) and wait 2 minutes.
Please accept my condolences, because if you are reading this article, it means your Android tablet has stopped turning on. The reasons may be “hardware” or “software”. The first reason is the physical inability to turn on due to damage to the battery, board, cables. The second is that someone screwed up the operating system on the tablet, and due to the fact that it got up crookedly after, or some freshly installed program turned out to be extremely incompetent, the device cannot “start up”.
The tablet won't turn on at all
1. Remember the last time you charged your electronic friend. One of the most common reasons is a tablet. fully discharged. In this case, even if you put it on charge, it will take some time (sometimes up to 10 minutes) before the tablet has enough power to turn on. Sit next to the patient, and after a one-minute break, press the power button for a long time until the screen lights up. And yes, you must be sure that the charger is working. If there are no changes, check on another device to see if the charger is working, or change it. If you are interested, then you need another article.
2. Remember, maybe you gave a tablet to a child? Perhaps the baby slammed the screen as hard as he could into the corner of the crib and damaged the display. In this case, the tablet itself may work, but the screen will have to be replaced. The same situation occurs if the tablet lands from a height of one and a half meters on asphalt or a tiled floor. There is little you can do to help him on your own; you can only sympathize with the poor fellow. Typically, a damaged screen is indicated by visible mechanical defects, or the absence of an image when turned on (instead, only the backlight may be visible, and even then not always).
3. The tablet did not fall or hit, but there is no image? Unlikely, but still: perhaps the video adapter has failed.
If your tablet is still under warranty, then it’s stupid to fix it yourself. Take it to the service center and don’t worry. Of course, you can download the diagrams on the Internet and try to fix it yourself or give it to a friend, but it’s better not to do this.
The tablet only turns on halfway
A software glitch is to blame for everything, and only that. In such cases, we see the display backlight turn on, and then endless loading (ANDROID is constantly flashing), or we see an image with a broken green robot.
This may be a consequence:
1. Incorrectly installed or malfunctioning games, programs, launchers.
2. Forcefully terminated system processes, ensuring the stability of the operating system. This can easily happen if you “killed” the system process through some kind of task manager (or dispatcher), or with a third-party “battery saver” program. Believe me, this happened to me once.
What can be done in such a situation?
There is a chance to “revive” the tablet by resetting its settings to factory settings. This is done using Hard Reset, and it is better to google how it is done specifically for your model. Especially if you have a tablet from a Chinese manufacturer. I highly recommend that you read the instructions for hard reset on various devices. I will briefly describe the general principle; most likely you will need to do the same:
- Turn off the tablet
- We take out the memory card and SIM card (just in case)
- Press and hold the volume down key ( and for some it is a decrease!) and the power button for about 10 seconds, the time is also not the same for all tablets.
- The tablet should vibrate
- A menu appears. Use the volume and power keys to select the item Settings. Further - Format System
- Choose Reset Android, tablet reboot
- All data and settings that were in the device’s memory will be erased and returned to the factory settings.
- Don't be alarmed if you don't succeed the first time, you usually succeed the second time :)
If these instructions did not help, try using the advice on a hard reset from commentator Dima in the article, you don’t have to look for the advice itself in the comments, I added it to the article. It also helps to bring the device back to life. And how to restore a tablet after unsuccessful firmware is written.
Just in case, English video instructions for a hard reset for the Acer Iconia Tab A500 tablet:
If a lying Android appears with a red exclamation mark
In many, I noticed in the comments, everything ends like in the picture, or something like that:
This is a stock recovery mode (if you're wondering what that is), and there's nothing wrong with it and you shouldn't be afraid of it. Moreover, you can - ClockWorkMod Recovery. If you see it, it means it works - and that’s good. You got into it because you entered the wrong combination for a hard reset, and I warned you that it is not the same for all tablets. In this situation, you can press and hold the power button until the tablet turns off and try again, or just wait 5 minutes until it turns off and repeat the process. Try again, as a last resort you can just reflash.
Fastboot mode
Sometimes, when trying to find the right combination, users end up in Fastboot mode. In such a situation, we see the “Android” lying down with an open belly/belly, but without an exclamation mark. An example of such a menu for Nexus 7 (2013) in the photo:
If you get here, then use the volume buttons to select the item Restart bootloader and press the power button to confirm your selection. Perhaps this will help you boot up a tablet that has not turned on before.
In general, it is useless to advise anything specific here, since each model has its own paddocks. For some tablet models, you just need to press the “Home” button if a lying Android with an open belly appears - and a menu will appear in which you can select to reset the settings. And for some, press volume up and down at the same time. And wait.
After such cleaning, the tablet will return to its standard form for this model, as if it were out of the box. Let's look at all the ways to reset the system. Any hard reset looks like rebooting the tablet and formatting the information in it. In each specific case, the operation can be performed differently, for example, by clearing the SD card or resetting the pattern.
Before resetting system settings don't forget to save your data located on the tablet (SMS, contacts and other records). After a reset, all user entries are erased from memory along with the settings.
Method 1 - Through the menu(if the tablet turns on) Method 2 - Digital combination(if the tablet turns on) Method 3 - Using buttons(if the tablet does not turn on)
 | 1. Turn off the tablet. The battery must be fully charged. 2. We press two buttons at the same time: power and volume up rocker. You will see a green robot on the display - release the buttons. 3. We are waiting for the Recovery menu to open. If nothing opens, press the power button once, or the home button. 4. Navigate through the menu using the volume rocker. Select an item wipe data/factory reset. To do this, you need to press the power key, which in this case serves as the OK button. 5. Next question will appear confirm wipe of all user data, we agree by selecting the item Yes - delete all user data. 6. After this, select the item reboot system now, the tablet will reboot and clear itself. |
