Modem mode has disappeared on iPhone - what to do? We enable modem mode without contacting Carrier Modem mode does not appear on iPhone.

Starting with iOS 7, Apple redesigned its operating system for the iPhone and iPad, adding many new features and completely changing the design concept. One of these innovations was the ability to turn the iPhone and iPad Cellular (3G/LTE) into a wireless access point to distribute mobile Internet to other devices. In the system, this function was called “Modem Mode” and allowed connection using Wi-Fi, Bluetooth or a USB cable.

But it may happen that after updating iOS, the “Modem Mode” parameter may disappear from the system settings and the mobile Internet on the device will disappear. It is not known why this happens, but as it turns out, this function can be returned - you just need to register the APN access point in the cellular settings. In this article, we will look at APN for different mobile operators and tell you how to set up the Internet and return the ability to share it with other users on the iPhone.

How to enable “Modem Mode” on an iPhone or iPad and set up mobile Internet (we register the APN of cellular operators)

Step 1 Open the Settings app on your iOS gadget

Step 2 Select Cellular menu → Cellular data network.
On devices with iOS 10 and 11 Cellular → In the Cellular data and Modem mode sections, enter the APN data, username and password for your cellular operator

Ukraine

Kyivstar
APN: www.kyivstar.net or www.ab.kyivstar.net
Username: leave blank
Password: leave blank

Lifecell (life)
APN: internet
Username: leave blank
Password: leave blank

Vodafone (MTS)
APN: internet
Username: leave blank
Password: leave blank

3Mob (Utel, Ukrtelecom)
APN: 3g.utel.ua
Username: leave blank
Password: leave blank

Russia

Beeline
APN: internet.beeline.ru
Username: beeline
Password: beeline

Megaphone
APN: internet
Username: gdata
Password: gdata

MTS
APN: internet.mts.ru
Username: mts
Password: mts

Tele2
APN: internet.tele2.ru
Username: leave blank
Password: leave blank

Tinkoff Mobile
APN: m.tinkoff
Username: leave blank
Password: leave blank

Yota
APN: yota
Username: yota
Password: yota

Belarus

MTS
APN: mts
Username: mts
Password: mts

Life:)
APN: internet.life.com.by
Username: leave blank
Password: leave blank

Velcom
APN: vmi.velcom.by or wap.privet.by(subscribers of TP PRIVET, TP “Communication without obligations”)
Username: leave blank
Password: leave blank

Step 4 Reboot your iOS device

After these steps, the “Modem Mode” item will appear in your settings, and mobile Internet (cellular data) will also appear if it did not work before.

You will find more useful information on our pages in

How many times does it happen that you have a computer, you need to connect to the Internet from your PC, but there is no way to log in via Wi-Fi. What to do then? Is it possible and how to distribute Wi-fi from an iPhone?

Apple iPhone 6 can be used not only as a phone, but at the same time as a modem, while distributing the Internet within the range of your network.

This process can be achieved quite quickly by following a number of simple steps. Apple smartphones for iPhones 4s, 5s, 6, 6 plus and 7 will also be able to distribute modem mode on the iPhone 6. You can also distribute the Internet to other Apple devices and to any phones, as well as tablets and computers. In turn, other devices such as iPad, Android phones, tablets and computers are also capable of distributing the Internet like a modem.

Having a SIM card for accessing the Internet at high speed from network operators such as MTS, Tele 2, Yota or Beeline, or other mobile operators, using your iPhone you will be able to activate a Wi-Fi access point. Of course, it’s good if you have unlimited Internet, otherwise the traffic will quickly be used up and all the money on your phone account will be spent.

You just need to know how to enable modem mode on the iPhone 6. You can connect your iPhone as a modem when you need to help friends if they have run out of traffic on their phone or connect a laptop to the Internet while on the road. The good news is that setting up an Internet access point will take just a couple of minutes, unlike stationary routers and removable modems.

You can distribute the Internet from your iPhone to any device in different ways: via wireless WI-FI mode, using the Bluetooth function, via a USB cable to a tablet device or PC. Of course, it is certainly more convenient and faster to transmit via Wi-Fi wireless mode.

Let's consider the option of how to distribute the Internet using WI-FI. In order to solve the issue of how to set up and connect modem mode, how to distribute wifi from iPhone 6, read the following connection procedure. Open the main menu of your smartphone screen and enter the “Settings” of the phone, then go to the “Cellular” section and select the “Cellular Data Network” function. Next, enable “Modem Mode” by first entering the secret password. It is necessary to indicate your possible access point for the connection network when the password has not been entered previously, otherwise the connection will occur automatically.

The name and connected access point from your smartphone will appear on the receiving devices. That is, a so-called virtual modem will appear in the connected device, through which you can additionally launch a PC or other device to the access point on the iPhone. In this case, you need to use the Wi-Fi password, where it is visible in the settings.

If your friends want to connect their smartphones to your iPhone 6 in order to receive Internet distribution from the iPhone in Wi-Fi mode, and your distributing iPhone 6 is already configured for a modem, they can set up a Wi-Fi access point in their smartphones, and you need enter the secret access password you created and confirm activation.

When you connect other devices to your smartphone, you will read a message about this on the status panel. By the way, please note that the mode of the connected Wi-Fi modem is not displayed on the screen. Therefore, the battery in the distributing smartphone can discharge very quickly.

Know that you can distribute high-speed Internet from one source and to several devices at once: iPhone, laptop, iPad and up to 5 more devices at the same time!

The rate of battery discharge will certainly be affected by the number of receiving instruments connected to the network. The more there are, the faster the distributing iPhone will run out.

If you need to change your Wi-Fi network password, go to Settings again, go to Modem Mode and set a new Wi-Fi password.

In this case, the selected Wi-Fi password code must contain at least eight ASCII characters. Other characters will not work, since other devices will not be able to connect to your access point in this modem mode. Characters that will not work are language characters from Japanese, Chinese or Russian. ASCII characters are:

Upper and lower case letters of the English alphabet;
Arabic numerals from 0 to 9;
other punctuation marks.

Be aware that with future phone firmware updates, cellular data settings may be reset, so “Modem Mode” will again drop out of the menu settings.

Is it possible to do something if you were distributing the Internet and suddenly the modem mode on the iPhone began to disappear by disconnecting all additional smartphones from the network?

But it happens, on the contrary, that you updated the iPhone program to iOS 8.1 or 9 and the modem settings on the distributing iPhone failed, and the device reports that the modem mode is unavailable.

Sometimes the modem mode simply disappears and does not work, and sometimes the download does not occur and the modem constantly freezes when connected persistently.

Don't think that the dial-up service has disappeared or been deleted. When connecting, it is as if the six simply turned off the modem function by default, deciding that the owner of the device does not use this service. In fact, this function has ceased to be enabled in order to avoid the company’s liability for the operation of the modem connection service, taking into account the specific settings of various Internet companies, as well as operators in different countries.

Most users, without hesitation, constantly connect their iPhone 6 as a modem to different devices, so locking this function causes indignation among users due to the inability to solve current problems. This problem can also be resolved by restarting the modem.

Removing modem mode

A lost modem can be restored using the process of deactivating the modem mode in the iPhone 6 or iPhone 6S, which is quite possible if iOS 9 is installed. In this case, the subscriber must first turn on the modem mode, then manually enter the parameters of his immediate operator, for example, the Beeline operator must be written down - Beeline , Tele 2. In this case, the order of entering settings must be performed clearly in a certain sequence.

If, nevertheless, when connecting to your network, the message “Unable to connect to the network” appears on the screen, you need to eliminate the body of the problem that is preventing the connection. To do this, take the following steps step by step.

Modem mode is a rather convenient function that allows iPhones and iPads with a cellular communication module to “distribute” mobile Internet via Wi-Fi. Usually, this feature works without any problems, but in iOS 7 it sometimes crashes. This bug will probably be fixed soon, but what if the Personal Hotspot connection doesn’t work and you need it now? We offer an effective solution to this problem.

First, enable modem mode on the device from which you want to “distribute” the Internet. In iOS it is called “Modem Mode” and is hidden in the settings), as you usually do.

You need to perform all other manipulations on the device from which you want to connect to the personal access point.

If you are connecting from an iOS device:

Connect to the distributed access point as usual
Click on the icon (i) with information about the access point to which you are connected. Information about IP, DNS and other access point settings will open.
In the IP Address section, open the “Static” tab. and in all fields (IP Address, Subnet Mask, etc.) enter 8.8.8.8

Congratulations, you have set up manual DHCP settings and can now enjoy your Wi-Fi connection.

If you are connecting from a Mac:

Connect to the distributed access point
Open System Preferences from the  Apple menu, go to the “Network” section, select the Wi-Fi connection and open the “Advanced” option
Select the TCP/IP tab, scroll to “IPv4 Setup”, open the “DHCP with Manual Address” submenu
Fill in the IP address, subnet mask, router and DNS fields as on iOS (8.8.8.8)

If you are connecting from Windows:

Go to Control Panel, select “Network and Sharing Center”, open “view connection properties”
Right-click on the distributed access point and open its properties, go to the “Network” tab, select “Internet Protocol Version 4 TCP / IP IPv4”, click “Properties”
Select "Use the following IP address, fill in all fields as in Mac and iOS

So, by manually setting up DHCP on iOS/Mac and Windows, you can easily solve the problem with connecting to an access point distributed from an iOS device. We hope that this instruction will help you solve the problem :)

Apple annually releases a major update to its iOS operating system, designed for mobile devices - iPhone and iPad. After the update, various errors are possible, including resetting your Internet connection settings. If this happens, the iPhone user may encounter the problem that the modem mode has disappeared from the settings and it is no longer possible to distribute the Internet to other devices. For the function to return, you just need to manually enter your cellular data, and below we will look at how to do this.

Why do you need modem mode on iPhone?

We recommend reading:

On iPhones and iPads that have GSM modules installed, it is possible to distribute the Internet to other devices, turning the Apple device into a kind of modem. To distribute the Internet from your iPhone, just go to the settings and activate this function. Next, from another device you need to detect the iPhone acting as an access point and contact it to start using its mobile Internet.

Note: When distributing the Internet from an iPhone or iPad to other devices, traffic fees (if installed) are collected from the device acting as a modem.

What to do if modem mode on iPhone or iPad disappears

Modem mode is displayed in the list of categories in the iPhone settings, as well as in the “Cellular” item. If you can’t find the option, the reason for this is that your Internet connection parameters are messed up. . To restore the missing tethering mode on iPhone, you need to do the following:

After completing the steps described above, you will notice that the “Modem Mode” item has become available in the settings.

iOS 9 users report an error specific to this version of the system: when upgrading to “nine,” “Modem Mode” disappears. The problem manifests itself differently depending on the cellular operator whose SIM card is installed in the device. For some, the function disappears from the settings menu, for others it does not work or does not work correctly.

Why did the Modem Mode function disappear?

The problem of the function not working properly has nothing to do with hardware defects or device features, so it appears the same on all iPhones. Most often, the error occurs after upgrading to a new version of the operating system.. As it turned out, the failure occurs due to a configuration reset of the cellular operator settings.

Usually the configuration is set automatically; the necessary data is contained in the SIM card memory. But when the system is updated, the setting is reset, which is why “Modem Mode” does not work.

How to fix the error and return the function

The algorithm for solving the problem will be the same for all versions of iOS: you need to configure the APN for modem mode yourself.

APN (from English Access Point Name, access point name) is a unique name and at the same time the address of the access point through which the user connects to the network. Accordingly, a username and password are required to gain access to the APN. The cellular provider reads these settings and assigns the correct IP address to the network, connects to the appropriate security gateway, and determines whether it needs to be configured to connect over private networks. In our case, when using modem mode, the device transmits access to its telecom operator to other devices via the Wi-Fi network.