Using iPad tablets is convenient and effective for both work and leisure. But there are situations in which such electronics may malfunction; no device is immune from this. In order to get out of such situations correctly and not constantly contact specialists, you need to be able to optimally and timely get your tablet out of a frozen state.
A reboot is a sequence of actions aimed at removing the device from a state of inhibition and lack of response to commands. At such a moment, the home button may not respond and pressing the screen may not produce any results either. Sometimes it seems that it will not be possible to remove the tablet from this position. This is wrong.
Sometimes you don’t have to resort to the reboot process, but simply wait until everything is restored on its own. This largely depends on the cause of the failure. This can often occur due to an unfinished installed application or when the system is heavily loaded. At such moments, you can wait. After some time, the system will restore operation on its own and close the inoperative application. The cause will be eliminated and the freeze will go away.
Not everyone likes to wait; some find it difficult. And waiting is good only when you know for sure the reason why the device is hanging. If the reason is not known, there is no point in waiting. Here are a few methods to take if your iPad freezes.
Normal reboot mode
Hold down the “power” key (this button on tablets is located on the top panel) and hold until the menu appears. It will display the “shutdown” option. Click on it and the device will turn off. This may last 10-15 seconds. Wait a little and hold down this key again until the iPad appears to turn on (the “apple” logo is displayed). This action will allow you to restart the system and reset all applications that are not working correctly, which will speed up the operation of the device.
It is useful to turn off the device periodically during operation. This helps clear unnecessary information from RAM and speed up work. This is also a prevention that the system may freeze.
It is good to use this method in cases where the gadget does not respond at all to any user actions. In order for the iPad to start rebooting automatically, you must simultaneously hold down the “home” and “power” keys. This will allow you to restart, after which the gadget will turn on on its own. The system will also be optimized and malfunctioning applications will be closed.
Unusual way
If the iPad does not hang, but you cannot restart it by holding down the “power” button, one of these methods will do. They facilitate a complete restart of the iOS OS. These methods will solve the problem of a hardware defect in the “power” button.
The first way is to select an active bold font. The second is to reset settings for wireless networks. This can be done in the settings menu in the “reset” section. There in the list you can find the column “Reset network settings”. Click on it and you're done.
Software method
This method is also suitable for the case when the “power” button is not working properly. In the main settings, you must select the “universal access” option. Then tap on "Assistive Touch". Open this panel and click on the “device” icon. Next, point to “lock screen” and hold your finger on it for 2-3 seconds. If everything is done correctly, a screen with the “shutdown” function will be displayed.
Now you can slide your finger across it to the side and the gadget will turn off. To turn on without the assistance of the “power” button, connect the tablet to the computer via the original USB cable. After this, the tablet will start in normal mode. This method allows you to clear RAM of unnecessary information and stop applications that are not running correctly. After which, the device will work faster.
Discharging and charging the battery
This is a long and not very convenient method, but in extreme situations it will also work. If the tablet has stopped responding to user commands and for some reason it cannot be rebooted as standard, this method will do. Just leave the gadget to discharge. Once the battery is completely discharged, the tablet will turn off.
Next, you need to put it on charge and fully charge it. Once filled to the required level with energy, it will turn on itself. This will reset software failures, close applications with operating errors, and clear RAM of unnecessary data. When the device reboots, even those programs that were running in the background are turned off.
Knowing these ways to reboot the system, you can easily eliminate device glitches and be able to turn it off even with the power button not functioning. Periodically resetting the system will allow the tablet to work faster by clearing RAM and eliminating errors in applications. By learning to cope with such situations on your own, you will save yourself from the need to contact a service center for help.
The iPad is often used to download a large number of applications and movies. Sometimes the tablet may not be able to withstand the load and stop working. Naturally, there is no need to take it to the service center; just reboot it.
Although iOS is famous for its smooth and uninterrupted operation, sometimes Apple devices freeze and slow down. If your iPad is frozen, a simple or forced restart or factory reset will help.
When your iPad won't turn on after you've finished using it, check to see if it has enough charge. To do this, connect the tablet to the network. If an icon appears on the screen as in the screenshot below, wait 5-10 minutes for the required recharging to turn on.
If the system failure is minor, a simple reboot using the power button may help. It is located on the top panel of the device. Press and hold it until a window appears that says "Turn off".
Slide the switch to the right to turn off iPad. If the device gets warm, wait a moment and then press and hold the button again "Nutrition" before the Apple logo appeared.
In some cases, just calling this window helps the tablet to “sag” and start working. In this case, tap on the cross icon and return to the screen "Home".
Sometimes the iPad may not respond to pressing the power button, and then you have to resort to a hard reboot. To do this, we need to press and hold two buttons for 10 seconds: "Home" And "Nutrition".
What brought you to this article is such a common problem as iPad freezing. Despite the fact that it may seem completely frivolous, some serious problems, primarily related to the tablet’s operating system, can go hand in hand with it.
Freezing can occur due to many factors and its “treatment” will also depend on the specific case. Next, we will look at the most common of them and offer options for getting rid of this annoying glitch.
Despite the fact that the iOS operating system used on the iPad is highly stable, sometimes the Apple tablet may freeze. Therefore, a fairly large number of Apple tablet owners are interested in the question of how to restart the iPad if it suddenly freezes.
Hard reboot iPad
A hard reset is the only effective method to get your iPad back up and running if it's not responding to anything you do. Making such a reboot is quite simple. For this:
- We take the tablet in our hands and press the “Power” button located on the top edge of the case simultaneously with the “Home” button (on the front side at the bottom of the iPad screen).
- We hold the buttons until the device turns off and turns on again, that is, until the Apple logo appears on the monitor
Standard tablet reboot
If you just need to restart your Apple tablet, for example, if it starts to slow down, then to do this, just hold down the power button until a slider appears on the monitor with the words “Turn off”. All you have to do is make one movement with your finger and the device will turn off.
It is worth noting that it is necessary to turn off the iPad regularly so that it does not freeze at the most inopportune times and functions normally. The fact is that during this procedure the RAM of the gadget is cleared, which can become clogged during the operation of the device.
Restart iPad using a non-standard method
The tablet does not freeze, but it is impossible to reboot it using the “Power” button. Sometimes such a situation may arise, and in this case you will have to resort to using some atypical methods. Among them:
- activation of bold font;
- Reset wireless network settings.
These two procedures initiate a complete reboot of iOS, so they are also necessary to have in service. They will help you cope with the task of rebooting the device in the event of a hardware problem with the power button.
Now you know what to do when the iPad freezes or needs to be turned off and on for another reason. Therefore, the question of how to restart iPad will no longer be difficult for you.
Note that the described steps are equally true for both Apple tablets and iPhones, so knowing about them will be useful for every follower of Apple mobile gadgets.
Hard reboot
This reboot option is suitable if the iPad does not respond to any commands. Press the Power and Home buttons at the same time. You must wait 10 seconds. After this, the device should turn off. To turn it on, just hold down the Power button - and the iPad will work properly.
Using a hard reboot should not be permanent. Do not use this method for any problem with applications. Otherwise, you will only harm the device’s file system.
Reboot and restore iPad
If your iPad is frozen, you don’t know how to restart it and there are many hints of poor performance, you can try to completely restore the tablet. After this procedure there will be two options:
- You will restore the iPad version from the saved backup;
- You will use your tablet from scratch, like new.
To do this, turn off the gadget in an acceptable way (see above). After that:
- Connect the iPad to your computer. There is no need to turn on the tablet.
- Open iTunes (the program version must be recent).
- Press the Home button on the tablet and hold it.
- Follow iTunes' instructions and click "Restore iPad."
- We wait for the recovery to complete, then select the option to use the iPad.
The following methods will help you quickly restart your iPad. Restoring the tablet is recommended in cases where it has a lot of unnecessary applications and their cache. It happens that the memory is occupied by unknown data. Even if you delete programs and all files manually, you cannot restore the required amount of free space. Recovery solves all problems.
Causes and solutions to freezes
Each case of device freezing is individual.
In general, several categories of problems can be distinguished:
- lack of response to key presses or interaction with the sensor;
- inability to get to the “Home” screen;
- iPad freezes and won't turn off in sleep mode;
- the gadget does not respond to attempts to turn it off;
- Freezing when updating or resetting settings;
- white screen appears.
For these failures, the ways to get rid of them will also be different. We'll talk about this in more detail later.
When updating
If the iPad freezes during the update process, then to restore its functionality you will need to delete the current version of the software and return the one that was installed before it.
For this we need:
Important! Make sure that cables or power to the tablet are not disconnected during the update process. Even if the process completes successfully, the device may not have files necessary for it to function correctly. In the future, this can lead to serious problems and the need to reinstall the OS.
When resetting
The cause of freezing is most often internal errors of the tablet. What to do if one of them appeared right during the update or firmware of the device? Is your tablet frozen and unresponsive?
Do we connect the D-LINK router to the Internet? Read the article on how to configure the DIR 320 router
There may be several problems in this case:
- software error;
- problem with the firmware file;
- The update process failed.
When faced with one of them, you should understand that they are quite serious and can lead to errors in the operation of the device in the future. The solution may be to reflash and update again.
Attention! To avoid such problems, it is recommended to use a known working firmware file and not interrupt the tablet update process.
When turned on on apple
Another common mistake is the device freezing on the apple - the startup screensaver.
The most likely reasons for this iPad behavior are:
- start the update again;
- remove applications causing the conflict;
- reinstall the OS using proven firmware;
- remove contaminants or take the device for repair.
It also happens that the tablet’s operation is interrupted by the appearance of a white screen. The reasons for this phenomenon may be hidden in both software and hardware failures.
To help get rid of this problem:
- Turn off iPad by holding down the Home and Sleep buttons for about 10 seconds;
- the so-called “hard reset” - pressing the “Home” button located on the front side of the device and the “Power” button located on top.
Important! You must hold the buttons until the tablet reboots completely, until a splash screen with an image of an apple appears on the screen. A forced restart does not delete data from the device.
How to restart iPad if it's frozen
If you experience any problems with your iPad, it's often enough to just restart it. But when frozen, it may not respond to normal restarts, touches, and pressing other keys.
A forced reboot will help, which is quite simple to do:
If the problem persists, repeat this procedure and then contact a repair shop.
Note! The reboot time for each specific case can range from 2 to 30 seconds. After this, the device will be ready for use again and the information on it will be completely saved. This process is similar for the iPad 2, as well as other Apple devices.
Separately, it is worth mentioning that the tablet freezes due to mechanical damage.
The most common of them are:
If after this there are problems with the operation of the iPad, then you should pay attention to several points:
- if moisture gets on the device, it must be removed immediately using a soft cloth, sponge or dry wipes;
Important! A hairdryer is also suitable for this, but it is very important not to use heating modes - this can lead to overheating and subsequent breakdown of the device. You can remove moisture from it only with cold air and very carefully.
Local network and public Internet access point. Review in the article, setting up a local network via a wifi router
Mikrotik - quick setup of access point RB951G-2HnD. More details here.
- try not to leave the iPad in the sun for a long time and carry it only in a bag, protecting it from bad weather;
- Clean your tablet from dust in a timely manner, either on your own or by contacting a service center;
- after a fall, if errors continue to appear again and again, we recommend that you seek professional help.
Attention! It is recommended to disassemble the tablet yourself only if you already have similar experience.
So, we have looked at all the most common reasons that can lead to a tablet freezing. In many of the above cases, the problem that has arisen can be easily solved at home, but when the failure is not software, but hardware in nature, the best solution would be to contact a specialist.
Previous article: Hard drive gets hot
Next article: Windows 7 Blue Screen
Force restart iPad Pro 2018
Step 1: Quickly press and release the Volume Up button on the right side of the iPad. You just need to press the button, and not hold it down for a long time.
Step 2: Immediately after this, press and release the Volume Down button.
Step 3: Now hold down the Power button on top and keep holding it until the Apple logo appears on the screen.
Wait a couple of seconds for your iPad Pro to boot up and the lock screen to appear.
That's all. Now you can force restart your iPad Pro 2018 without the Home button.
Don't miss Apple news - subscribe to our Telegram channel, as well as our YouTube channel.
How to Take Screenshots on iPad Pro 2018
What is the difference between a “soft” and a “hard” reboot?
Both types of reboot are designed to turn off the phone and then turn it on automatically. There is no difference between them as such, the only thing that distinguishes them is the method of activation. It is also worth noting some important nuances:
- A “soft” reboot is mainly used in cases of slight jitters on the smartphone. This method helps to close all background applications and stop them from consuming excessive resources. Overall, this is a great way to free up your device’s RAM.
- “Hard” is a forced reboot of the iPhone X, which differs in that the device completely turns off. This is how it is possible to eliminate the most serious malfunctions, when any attempts to interact with the device turn into failure.
Depending on the severity of the situation, one or another method of “restarting” the smartphone is selected.
“Hard” restart of iPhone 8, X if the screen is frozen
The unusual method of activating the function causes difficulties at first. But, as soon as you perform this operation a few times, even such a labor-intensive method becomes understandable and accessible.
- Quickly press and immediately release the Volume Up button
- In the same way, press and release the Volume Down button
- Press and hold the button on the opposite side of the device until the Apple logo appears on the screen
This is a slightly convoluted method for completely rebooting the iPhone X and the latest Apple devices.
Soft restart iPhone X, 8, 7, 6, SE, iPad
All iPad models have the power button on the top of the case. Starting with the “sixth” iPhone in smartphones, it moved from the top to the side. Therefore, depending on the model of your device, you need to hold down the power button located either on the top or on the side. In general, the method of “soft” rebooting the phone is carried out in the following way:
- Press “power” for a few seconds and wait for the slider to appear on the screen
- Swipe left on the "Slide to Power Off" slide
- After turning off the smartphone, press “power” again to turn it on again
- If necessary, enter a password
It will be possible to perform these actions if the device’s touchscreen responds to user actions. If this does not happen, resort to the forced hard restart described above.
Reboot iPhone 7, Plus using two buttons
“Seven” in fact became the first device in the Apple product line that doomed the tactile “Home” button, which became more a part of the operating system than a structural component of the smartphone. The innovation led to minor problems, namely the fact that in the event of a software failure of the OS, it also refused to work correctly, preventing the activation of a “hard” reboot. The engineers of the Cupertino corporation have developed the following algorithm of actions for such cases:
- On the right side of the phone, press the power button
- Simultaneously press the volume down button located on the left side
- Wait for the apple logo to appear
- Enter your password if required by the system
We smoothly move from complex to simple. Now let’s look at the instructions for restarting the “sixth” iPhone and earlier versions.
What to do if your iPhone 6, 6S, SE, 5S, 5, 4S, 4 is frozen
A forced reboot of these iPhone models will not cause any difficulties, perhaps, even for the most novice users and owners of Apple products. If the picture on the display of your smartphone freezes, the touchscreen has stopped functioning completely, it’s time to “force” the device to “unload” its RAM.
- Hold down the Home and Power buttons at the same time
- Hold until the Apple logo appears on the screen
- Release the two buttons and wait until the iPhone turns on again
- If required by the system, enter your password
By following these simple steps, you can easily solve most of the software problems that, albeit rarely, arise while using the “six” and earlier versions of the Apple smartphone line.
Reasons for iPad inappropriate behavior, freezing and rebooting
In the course of diagnosing many devices, specialists were able to identify the basis of iOS problems, in particular shutdowns, reboots and freezes. Basically, the iPad suddenly reboots or freezes in the following cases:
- Lack of memory and use of too “heavy” applications. When you run an application on your iPad that requires file creation, saving, or caching, it may randomly shut down or freeze if there is insufficient memory. The situation is similar with applications that are not comparable in power to your iPad model. This mainly applies to older iPad models.
- Unfinished update installation. Interruptions in downloading/installing updates may cause problems with the system. Happens infrequently, but still possible.
- Reflashing the iPad and opening the system becomes, at a minimum, a factor that erases the terms of the warranty. Taking risks with their tablet, iPad users do so, and all responsibility rests with them. The iPad begins to reboot if there is a mismatch between applications and the system, or problems with the firmware in general.
- A hardware problem can occur due to mechanical damage, water ingress, or other manifestations of careless user handling of their gadget. In this case, the motherboard and battery may malfunction. Contacts and cables may come loose, causing the iPad to become unstable.
In order to successfully shutdown, you need to follow the steps below:
- Take your gadget on which the sensor does not work;
- Now simultaneously hold down two buttons: the on/off button (this button may be located on the top or side of your Apple gadget, depending on the type and model of the device) and the home button. You can see an illustration of this action below;
- Keep the buttons pressed until your gadget can be turned off;
- Now you can press the gadget's on/off button again. Thus, you have forced a reboot of the device.
If the buttons don't work
If for some reason not only the sensor does not work, but not a single button works, then there is only one way out of this situation: completely discharge your device until it turns off on its own. But cases when the buttons do not work are very rare.
That’s all for me, if you have any additions to this material or questions on the topic, you can leave them in the comments below this post. I will try to answer as quickly and as detailed as possible. If this material was useful to you, then share it with your friends on social profiles and accounts. I also recommend that you add this site to your browser bookmarks, as an owner of Apple equipment, you may need it. See you in the next lessons.
Spotify in Russia
Facetime doesn't work
iPhone 5s won't turn on
What do Emoji mean?
Udid iphone how to find out
Why reset your iPhone?
Hard reset often helps with the following problems:
- iPhone won't turn on;
- reboots spontaneously;
- iPhone froze. The screen is white (red). There is no information on it.
How to reset an iPhone to factory settings (hard reset)
- Turn off your device.
- Press and hold the Home and Power buttons at the same time until the Apple logo appears on the screen. (Usually holding down the buttons for 15 seconds is enough)
- When the apple appears on the screen, release both buttons and wait for the iPhone to reboot (20-40 seconds, depending on the model).
How to restart iPhone 7 and 7 Plus, using two buttons, if frozen?
The iPhone 7 and its sibling, the 7 Plus, were the first devices in the iPhone line to not have a physical home button. Like later models, the 7 Series phones used a tactile button that buzzed when you touched it, simulating a press.
Since it was a soft button, when the phone hung, it stopped functioning. This is why Apple had to develop a new restart algorithm without using the home screen button.
1. Press the Power/Lock button on the right side of the phone.
2. Simultaneously press and hold the Volume Down button on the left side of the phone.
3. Wait until the Apple logo appears (it may say “Slide to Power Off”, but you need to keep holding the buttons and the phone will skip this step), then the device will boot.
4. You will need to enter a password, even if you previously used fingerprint identification.
How to Restart iPad
Has your tablet started to work with errors and become glitchy? Has your iOS operating system slowed down? Have any programs stopped working? To eliminate most errors, it is enough to reboot the tablet. How to restart an iPad and get the operating system to work as before? There are several ways to perform this simple operation, which we will talk about as part of our review.
Why do you need a reboot?
The iOS operating system is characterized by its complexity. And each new version becomes more and more complex.
Meteorite72 - the best online store for LED lighting! Products of the highest quality, impeccable service, the widest range, excellent prices, guarantee.
System updates allow you to get rid of many errors, but it is still impossible to write an operating system that is ideal in all respects, just as it is impossible to create ideal electronics.
However, Apple tablet computers are very close to ideals, featuring stable and fast operation. But they are not immune from any errors.
If the iPad starts to glitch or slow down, there is no point in going to a service center. First you need to try to solve the problem yourself.
The most accessible tool for solving problems with your tablet is a reboot. It represents a restart of the operating system, which takes place without loss of user data.
The maximum that can be lost are documents that were not saved at the time of reboot.
- To restart the operating system in order to get rid of errors;
- To clear the application cache;
- To normalize the operation of individual modules of the iPad tablet;
- To normalize the execution of installed or system applications.
That is, if the tablet begins to work differently than before, it is enough to send it to reboot. After turning off and restarting the device will start working noticeably faster.
Normal iPad reboot
Have you noticed that your iPad is not working as well as before? Try rebooting it. It is useless to look for the Reset button here - there is none on board. How to restart iPad? To do this, you need to turn it off and on again.
This is done as follows - hold down the power button for 10 seconds and wait for the shutdown slider to appear. Swipe this slider to the right and wait for the device to turn off completely. Now you can turn it on by pressing the power button and waiting a few seconds.
A standard iPad reboot will eliminate errors in applications and the operating system. When you restart the device, the cache will be cleared and iOS will start again. But in some cases, a standard reboot does not work - this happens when serious errors occur that impair the functionality of the operating system.
How to restart an iPad if it's frozen? In this mode, standard reboot tools may not work. Therefore, we will learn how to force restart the iPad.
Force reboot iPad
If the standard reboot does not work, the device must be rebooted in force mode. In this case, data from unsaved documents will be lost, but all other information will remain in place. Therefore, there is no need to be afraid of this procedure - all important files will remain in the memory of your iPad.
To force restart your iPad, you must follow these steps:
- Press and hold the Power button and the Home button;
- Wait 10 seconds until the device turns off completely;
- Release the buttons and wait for the operating system to load completely.
Soft reset
How to restart an iPad or iPad mini if the buttons on the device are broken? This can really be done if you use the Assistive Touch function. It is turned on in the following way:
- Go to “Settings – General – Universal Access”;
- Enable the function;
- We observe the appearance of a software button on the smartphone screen.
Next, we proceed as follows - press the button, select the “Device” item, click on the “Screen lock” item and hold it with your finger until the standard shutdown button appears. Swipe the button to the right and wait until the tablet computer is completely turned off. To turn on the device, just put it on charge..
Have you tried rebooting your tablet, but it still doesn't work properly and is slow? It is possible that the problem is related to recently installed software. Remember what applications you installed on your tablet recently and after what manipulations the errors started. By removing incorrectly working software, you can restore functionality to the tablet.
In some cases, errors are so serious that it is impossible to cope with them using a standard or forced reboot.
If you want your iPad to work as before, try restoring the operating system– You can find the relevant instructions on our website.
After restoring iOS, you can enjoy the correct operation of your iPad. In the most difficult cases, service center specialists will come to your aid.
How to restart iPad - three ways to restart. Let's understand the nuances
It happens that the iPad freezes when working with some applications. This can happen when many applications are open at once (which puts a heavy load on RAM). Especially if you quickly switch and roll them with your fingers.
In many cases, users have no idea how to reset iPad. It also happens that a turned off tablet does not turn on by pressing the Power button as standard. We suggest considering the basic reboot methods, as well as some alternative options when system recovery is required.
Standard iOS reboot
The standard method of restarting the iPad is useful when the system failure is minor. To do this, you just need to hold down the Power button and hold it for a few seconds. The screen will then darken and a slider will appear at the top that says “Close.” All you have to do is swipe your finger.
In some situations, holding down Power and going to such a window is enough for the iPad to “come to its senses.” In this case, there is a “Close” button. First press it. If the problem is resolved, there is no need to turn off the tablet.
After turning off the iPad, wait until the RAM is cleared and the screen goes completely dark. If it gets hot from use, wait a little. Then turn on the tablet while holding the same on/off button on top of the case.
Hard reboot
This reboot option is suitable if the iPad does not respond to any commands. Press the Power and Home buttons at the same time. You must wait 10 seconds. After this, the device should turn off. To turn it on, just hold down the Power button - and the iPad will work properly.
Using a hard reboot should not be permanent. Do not use this method for any problem with applications. Otherwise, you will only harm the device’s file system.
Reboot and restore iPad
If your iPad is frozen, you don’t know how to restart it and there are many hints of poor performance, you can try to completely restore the tablet. After this procedure there will be two options:
- You will restore the iPad version from the saved backup;
- You will use your tablet from scratch, like new.
To do this, turn off the gadget in an acceptable way (see above). After that:
- Connect the iPad to your computer. There is no need to turn on the tablet.
- Open iTunes (the program version must be recent).
- Press the Home button on the tablet and hold it.
- Follow iTunes' instructions and click "Restore iPad."
- We wait for the recovery to complete, then select the option to use the iPad.
The following methods will help you quickly restart your iPad. Restoring the tablet is recommended in cases where it has a lot of unnecessary applications and their cache. It happens that the memory is occupied by unknown data. Even if you delete programs and all files manually, you cannot restore the required amount of free space. Recovery solves all problems.
At least once, every owner of an iPhone or any other iOS device has encountered software glitches when the device stops responding to touching the screen and pressing the mechanical control buttons (Home and Power).
What to do if iPhone freezes and refuses to obey basic commands? In today's instructions we will introduce you, dear readers, to 3 methods how to restart iPhone from any condition.
To begin with, let's assume that your iPhone is working in normal mode, it responds correctly to touches on the touch screen, obediently responds to commands using the Home and Power buttons, and you need to restart your iPhone in normal mode.
How to restart iPhone in normal mode?
Force restart iPhone
What to do if your iPhone is frozen and does not respond to touches or presses on mechanical control buttons? iPhone and any other iOS device can be forced to reboot from any state. For this:
The method allows you to force restart your iPhone or iPad when a software glitch occurs. We advise you to use this procedure in case of emergency, and if you can get by with the remaining 2 methods, use them. Leave this one as a last resort.
Video instruction “Hard Reset iPhone”
The third and final method of rebooting the iPhone is effective only when the iOS device is operating normally, when the touch display responds to touches and the device performs the necessary operations, but the power button is damaged or does not work.
How to reboot iPhone without a button?
Manage mobile devices from Apple and iPhone in particular, Can And without mechanical control buttons.
The creators took into account, although the high, but still limited resource of mechanical controls, and in case the touch display of your iPhone has outlived the control buttons, the operations for which the “mechanics” were responsible can be performed using gestures.
In order to enable full touch control of your iPhone, you must enable the " Assistive Touch". This function allows you to flexibly configure device control using gestures and completely replaces mechanical control buttons.
Activating Assistive Touch
Turn off iPhone using Assistive Touch
As part of this instruction, we will get acquainted with the method of turning off an iOS device without using the “Power” button using the Assistive Touch function.
Video instruction “How to restart an iPhone without a button”
A few words in conclusion
The methods described above allow you to completely turn off or restart your iPhone or iPad from any state, in normal mode, if the iPhone is frozen or the Power button is faulty.
The latter method, using the Assistive Touch function, allows you to configure the control of your iOS device using gestures with maximum flexibility, with one “BUT”, the touch panel must be working properly and the device must function in normal mode; Assistive Touch does not work on a frozen iPhone.
If you, dear users, have any questions or difficulties in managing or setting up the touch control of your iPhone or iPad, please contact us in the comments and we will try to help you as quickly as possible. Are you using Assistive Touch? And How?
iPhone modes iPhone FAQ
How to restart an iPhone: standard, forced, without buttons
The iOS operating system can work flawlessly for years, but at some point, for no apparent reason, the device will freeze and require a reboot. It is also recommended to restart your iPhone and iPad, for example, if applications are not working properly. Other situations may arise when you need to restart the device by resetting the current session.
iOS provides several ways to reboot your device. This can be done in normal mode, in emergency mode (forced reboot when frozen), and even on an iPhone or iPad that does not have mechanical keys. This article will discuss all the ways to reboot Apple smartphones and tablets.
How to Restart iPhone or iPad
The iPhone and iPad have several mechanical keys, one of which is responsible for locking the device.
To normally reboot the device, you need to hold it down for 5-7 seconds, after which the screen will allow you to turn off your smartphone or tablet by swiping your finger from left to right across the corresponding area of the screen.
When this action is completed, the iPhone or iPad will begin to turn off, which may take up to 30 seconds.
To complete the device reboot process, you must turn it on. To do this, press and hold the screen lock button again until the Apple icon—a bitten apple—appears on the display. At this point, you can release the button and wait for the device to boot, which may take a couple of minutes.
How to Force Restart an iPhone or iPad
In some situations, an emergency reboot of your iPhone or iPad may be necessary. For example, it is necessary when the device’s display does not respond to touches, and it is not possible to swipe your finger across the screen to turn off the device. To force restart your iPhone or iPad you will need to do the following:
Important: Apple regularly releases firmware updates for its devices. According to the recommendations of software developers, it is necessary to force a reboot of the device after each such update to avoid system failures.
How to reboot an iPhone or iPad without buttons
Apple devices have a long life cycle, and they fail only due to the fault of the owner, who may drop a smartphone or tablet, resulting in a broken screen or cracked board.
Also, if used carelessly, the Home button or the shutdown button for iPhone and iPad may break. In this case, you will not be able to restart the device using the instructions described above.
But Apple also foresaw this point by introducing a feature called Assistive Touch into its touch devices, which can be translated as “Assistive touches.”
The Assistive Touch feature allows you to perform various actions, including those that use mechanical buttons on the device. Using assistive touches, you can reboot your iPhone or iPad without buttons. To do this, you will first need to enable Assistive Touch as follows:
Please note: Assistive Touch can be customized to suit your needs. To do this, you need to click on “Top-level menu” on the activation page, after which you will be able to change the number of icons that Assistive Touch contains, as well as configure commands.
When Assistive Touch is turned on, the user will be able to turn off the iPhone or iPad without using buttons. To do this you need:
Important: If the buttons on your iPhone or iPad do not work, you can turn it on using your computer. To do this, you need to connect the device to the PC via a USB cable, and it will immediately start booting in standard mode.
How to restart an iPad (iPad), incl. force if it's stuck
In the modern world, many users prefer tablets from Apple. Largely due to the fact that these are truly some of the highest quality mobile devices.
Crashes and freezes are very rare for them. However, even an Apple tablet can become unstable.
Helping the device and bringing it back to life is quite easy - in most cases, just restarting the ipad is enough.
There are several options for restarting your iPad or iPad mini. The most popular way is to press and hold the power button until (usually it takes no more than 10 seconds) until a special slider (some call it a power off slider) appears on the display, which you then move with your finger to the right.
As soon as the tablet screen goes dark, you need to hold down the “Power” button again for a while. Release the key as soon as the world-famous apple logo appears.
The usual operation of rebooting the tablet will help the user get rid of errors in programs and operating systems. The cache will also be cleared.
Sometimes the Apple tablet freezes so much that it does not respond to any user commands. What to do? We can only hope for a hard or, as it is also called, a forced reboot. For this:
This reboot method is optimal if the iPad is frozen. Or its display does not respond to touches and other user commands. Can a hard reboot harm the device? Hardly.
This restart method doesn't even delete user data. Information is lost only from unsaved documents.
For example, before restarting the system you wrote a long message - now you will have to type it again.
At the same time, you should not abuse a forced reboot. Especially if it is possible to reboot the iPad programmatically.
The photo shows a forced reboot of the tablet
Software reboot method
We’ll just tell you how to reboot programmatically. This restart method is suitable if suddenly for some reason the tablet’s “Power” or “Home” button does not work (for a hard reboot).
You can restart your iPad without using buttons by activating the Asisstive Touch function. To do this, you need to go to the “settings” section, then to the “basic” subsection, where we find the “universal access” item. Then we activate Assistive Touch.
Not all owners of Apple gadgets know about non-standard reboot methods. Therefore, we decided to talk about them too.
Helpful information
- Many users ask on the Internet how to reboot an iPad 2 or iPad mini. Apparently, they don’t know that absolutely all iPad models are overloaded in the same way. So all the methods described above are applicable to all Apple technology.
- If any attempts to restart the iPad are unsuccessful, and the device screen remains dark, then the first thing to do is make sure that the device is charged. Perhaps the reason for the failure to work lies in the lack of charge in the battery.
- It is worth noting that, like any equipment, the iPad needs to be restarted regularly. Thus, the tablet’s memory and application cache are cleared, some system errors go away, the operation of individual models and many others is normalized. etc. This means that the device will function normally and will not freeze at the most inopportune moment.
- If, when rebooting, an icon with a cable appears on the iPad display, then you need to connect the tablet via a USB cable to the PC to restore its functionality via iTunes.
Instructions
Hi all! In many articles I write that in order to solve some iOS problems (and simply for prevention), it is necessary to perform a hard reboot of the device.
Moreover, from article to article I constantly briefly describe how to do this. To be honest, I'm tired of it.
Therefore, I decided to once write detailed instructions on how to perform a hard reboot (Hard Reset, as some call it) of the iPhone and iPad, and then simply provide a link to it. Brilliant :) Let's go!
What is it and why do it at all? Essentially, a hard reset is simply a forced reboot, which may be necessary in the following cases:
- The device is frozen, slow and slow.
- Any errors are thrown.
- Problems with wireless networks, keyboards, programs and applications, etc.
Please note that this procedure does not affect any user data, all information will remain in its place, nothing will be deleted. If the goal you are pursuing by doing a hard reboot is to erase everything from the iPhone or iPad, then you need to perform a slightly different operation, namely, a complete reset of settings and content - more details here.
Standard hard reboot of iOS device
Why is the word standard in the title? Because before the release of the iPhone seventh model, all iOS devices necessarily had these two mechanical buttons. So if your gadget is younger than the “seven”, then here is a way to force a reboot:
- The iPhone or iPad must be turned on.
- Simultaneously press two buttons - Home (round under the screen) + Power (turn on and lock).
- Without releasing them, we wait until the iPhone or iPad turns off.
- We continue to hold them until the screen lights up.
How to Hard Reset iPhone 7
In the iPhone 7, Apple added a lot, but also removed a lot. In particular, the Home key has ceased to be mechanical and, most likely, this will now be the case in all new models. So the old method, with pressing the home button, does not work (there is nothing to press). How can I hard reset my iPhone now?
- The device must be turned on.
- Simultaneously press and hold two buttons - Power (on) and “Volume down”.
- Continue holding both keys until the screen turns black and then the Apple logo appears.
- Let's release the buttons.
Thus, all manipulations are almost the same as in older models, except that now the “volume down” button is used instead of the Home key.
How to Hard Reset iPhone 8 and iPhone X
Apple, having released the iPhone 8 and iPhone X, completely changed the combination of buttons to force a restart of these devices. Now, in order to make a Hard Reset, you need to use as many as three buttons, and even press them in a certain sequence. Ready to stretch your fingers? Go!
Please note that everything needs to be done quickly enough. Pressed and released, pressed and released, squeezed and held.
Agree that there is nothing complicated in all of the above manipulations - everything is very simple, fast and easy. But despite this simplicity, the significance of this procedure cannot be underestimated - how many times have I used it to treat frozen iPhones... Eh, there were times... :) But this, of course, is a slightly different story.
P.S. Do you want to get a proper reboot? Give it a like! Both you and the author will be pleased - thanks in advance!
P.S.S. If your iPhone does not want to hard reboot, and you also have other questions, then immediately write in the comments - we’ll try to figure it out!
Reboot your Apple device
Hello everyone, dear readers. Today I will tell you how to reboot, as well as “force” reboot, your mobile Apple gadget: iPad, iPhone, and iPod touch. A reboot may be necessary in several cases:
So, below I will tell you about two ways to restart your Apple mobile gadget iPad, iPhone or iPod touch:
. It consists of simply turning the device off and on. Suitable if the device, iPad, iPhone (4 - 4s, 5 - 5s, 6), as well as iPod touch, is not stuck “rigidly” and the on/off button reacts to interaction;Normal reboot
It is very easy to restart your iPad, iPhone (4 - 4s, 5 - 5s, 6), as well as iPod touch in the usual way. To perform this operation, follow these simple steps:
Here's an easy way to reboot your device. If this method does not suit you, you can forcefully restart your iPad or iPhone.
Force reboot
In order to force reboot your mobile gadget, you need to follow these steps:
That’s all for today, if you have questions about this material, you can ask them in the comments to this entry, for this you can use the special comment form located below this text. Also share the article on social networks. See you in the next materials.
How to reboot iPhone from any state?
It is unlikely that the owner of an iPhone or other iOS device has ever had problems with the software of his gadget when the device refuses to respond to touches on the display, including pressing the device control buttons. What to do if iPhone 4, 4S, 5, 5S, 6, 6S is frozen and does not obey the simplest commands of its owner? This article will discuss three methods for rebooting an iPhone from any state.
First of all, we will assume that the iPhone operates in standard mode, it has an adequate response to touches, obediently executes the necessary commands by pressing the Home and Power buttons, while the owner of the gadget needs to reboot the device into normal mode.
Reboot iPhone in normal mode. Effective ways
In iPhone terminology, this action is called swipe. Thus, the iPhone display will begin to go dark.
Then the Apple brand logo will appear on the screen, and the iPhone will start to boot in its normal state.
How to force restart an iPhone
Both the iPhone and any other Apple device can be rebooted from absolutely any state. To do this, you need to simultaneously press two keys: “Home” and “Power” for 10 seconds - no more. Then the iPhone screen will stop responding in any way and go completely dark.
It is this method that makes it possible to force a reboot of an electronic device in the shortest possible time, although it is advisable to use this method not too often in order to avoid the undesirable consequences of a device failure.
Video instruction “Hard Reset iPhone” - Forced reboot of iPhone
How to restart an iPhone without a button. Possibilities
This method is applicable only when the iPhone is working perfectly, there are no significant software glitches, but the start button is clearly damaged and does not work effectively.
Currently, effective management of Apple gadgets is possible not only through manual intervention. In fact, the developers of this device have thought out easier ways to turn it on. You just need to enable the function Assistive Touch.
This feature is designed to turn on the device without directly touching it. When this function is enabled, the device begins to understand remotely.
The same procedure applies if you need to turn off your iPhone without touching it. This is done by using the device menu.
Video instruction “How to enable Assistive Touch in iOS”
A few notes as a conclusion.
- The above mentioned methods are perfectly applicable when turning on, turning off and freezing an iOS device in any state.
- The last method is most effective when the gadget’s touch panel is in good condition, when it freezes Assist Touch does not function.
How to reboot iPhone and iPad: 4 ways
Considering the high cost of the iPhone, it can be assumed that most users prefer careful storage and use of the smartphone. And here the question arises - how long can the device work without rebooting, without losing performance?
In theory, a preventive reboot of an iPhone or iPad is not required at all, at least Apple doesn't mention it.
However, practice shows that when operating continuously for a long period of time, the device can significantly reduce performance or even go into “save mode,” that is, simply turn off and not respond to buttons (the problem and its solution are described here).
To ensure smooth operation of your smartphone, it is a good idea to completely restart the operating system once or twice a month. Below are ways to restart an iPhone (the same applies to the iPad).
Standard reboot of iPhone and iPad
The best way is to reboot normally. To do this, press and hold the power button until the “ slider” appears. Turn off“. Having swiped over it, thereby turning off the device, it must be returned to working condition by pressing and holding the power button again.
Restart iPhone and iPad through Settings
Starting with iOS 11, in iOS Settings, in the General section (at the very bottom), a Turn off option appeared, which allows you to turn off your iPhone or iPad.
To turn it on again, just hold the Power button on the side of the device for 3 seconds.
Force restart iPhone and iPad
iPhone 2G – iPhone 6s and all iPad models
If the iPhone or iPad does not respond to commands (freeze), you will have to force a reboot - press and hold the Power and Home buttons (round button) at the same time until the Apple logo appears on the screen (about 10 seconds).
iPhone 7 and iPhone 7 Plus
A hard (forced) reboot of the iPhone 7 is done a little differently. You need to press and hold the power button located on the right side of the device along with the volume down button located on the left side.
In both cases, the buttons must be held until the screen turns off (about 10 seconds) and then turns on again (the Apple logo appears).
iPhone 8, iPhone 8 Plus and iPhone X
To force restart iPhone 8, iPhone 8 Plus and iPhone X, you need to press and quickly release the volume up button, then do the same with the volume down button. After that, all you have to do is press and hold the side Power button until the Apple logo appears.
Reboot using Assistive Touch
The Assistive Touch feature is a virtual button on the iOS screen to which you can assign various actions, including Restart your iPhone or iPad.
To enable Assistive Touch, open the Settings application and go to General -> Accessibility -> Assistive Touch, where you need to set the corresponding switch to the On position.
After which a virtual button will appear on the screen.
Click on the Assistive Touch button and follow the path Device -> More -> Restart to restart your iPhone or iPad.
Confirm your intentions by clicking the Reboot button in the pop-up window that appears.
Based on materials from yablyk
No matter how reliable and high-quality Apple technology is, even it freezes. And here, since Apple tablets and with them the iPhone have become a very integral part of our lives, we need to be prepared and clearly know how to restart the iPad if necessary.
So, we have a question, what to do when the iPad freezes? Most people know the method by analogy with the Windows system, where you need to restart the computer with a button, because no other controls respond.
Another name for this procedure is a hard reboot or iPad hard reset. We take our naughty planets in our hands in a portrait position. Find the only “Home” button on the front panel and press it. Next, press the top “Power” button, which in normal life is responsible for locking the screen. And we keep them together until we see the well-known apple on the display.
Let's wait a little, and here it is our tablet - it works normally, loads our favorite applications and makes us happy again. This method is completely safe for the device and your data. The only thing that will happen is that all downloads and operations with files that occurred before the gadget freezes will be interrupted.
But, unfortunately, there are times when rebooting the iPad this way does not help. Here you need to figure out what the problem is, or take the tablet to a service center.
Of course, a hard reset of the iPad is not always necessary. Sometimes your device, especially if it is older, begins to slow down, has trouble launching applications, and has other glitches. In this case, you can get by with a standard reboot.
To do this, you need to hold down the “Power” button until a bar appears on the screen with the words “Turn off”. Next, use your finger to move the slider to the right, after which the device will begin to turn off. This takes from 10 to 20 seconds.
After the display goes completely dark, press the Power button again and hold until the apple appears. We are waiting for the download and again enjoy the excellent performance of the device.
Hard reboot iPhone, iPad iOS 10: Video
