As a rule, the idea to download Cryptopro 3.9 R2 for Windows 10 appears among entrepreneurs with a lot of paperwork. However, the product is also suitable for everyday purposes, because electronic signatures are increasingly becoming part of the life of an ordinary person.
Peculiarities
Cryptopro 3.9 R2 is a multifunctional cryptographic software. The latest, most current version is used on any Windows 10 device, including tablets. The scope of application of this program is very extensive:- Protection of the authorship of documents;
- Ensuring secure document flow;
- Working with electronic signatures;
The installation takes place in several stages, but to avoid mistakes, download the correct version - x32/x64 bits. And if your computer is running without , then even the most powerful cryptographic protection of documents will not protect you from possible penetration. Therefore, we recommend installing
If you purchased a License for the right to use the CryptoPro CSP software, then you were given a license agreement in paper form (A4 format). Please prepare it - you will need it soon.
Step 1.
Before you begin installing the program, we recommend checking whether you have an old version of CryptoPro CSP installed. You can do this in the following way:
1. Go to “Start” - “Control Panel” (or “Start” - “Settings” - “Control Panel”);
2. In the window that opens, find the “CryptoPro CSP” snap-in.
If you not found“CryptoPro CSP” snap-in, then proceed to Step 2.
If this snap-in is available, then run it and check the version of the installed program (the inscription “Product version”). If the program version is higher 4.0.9963
, then you can proceed to install the following programs.
Attention! For normal operation with a qualified electronic signature, the minimum required version of the program is -
4.0.9963.
Therefore, if the version of the program installed on you below4.0.9963
, follow the next step of the instructions.
Step 2.
To install the CryptoPro CSP program version 4.0.9963 download its distribution from the official website of the developer - the Crypto-Pro Company. Go to the "Downloads" section in the top menu and select "CryptoPro CSP" from the list. To download the program distribution, you must register on the site (developer requirement).
Download the distribution file CSPsetup.exe. This file is an installation program for a new version of the program and an update tool for the old version.
Step 3.
Run CSPsetup.exe and follow the installation wizard prompts.
At one of the installation steps, enter the program serial number (from the paper license form).
Step 4.
Wait until the installation of the program is completed, and then restart your computer.
If you have already installed the program in demo mode, or the annual license for the CryptoPro CSP program has expired, then to activate a new serial number you must perform the following steps:
1. Launch the program "CryptoPro CSP": to do this you need to go to “Start” - “Programs” (or “All Programs”) - “CRYPTO PRO” - “CryptoPro CSP”.
2. In the window that opens, select the “General” tab and click on the “Enter license” button
3. Enter the requested data (user, organization and serial number) and click on "OK" 
Activation of the program is completed.
In order to view the CryptoPro CSP serial number entered earlier, you must:
1.
Open the registry: Start - Run - regedit
2.
Find the required directory: HKEY_LOCAL_MACHINE - SOFTWARE - Microsoft - Windows - CurrentVersion - Installer - UserData - S-1-5-18 - Products - 05480A45343B0B0429E4860F13549069 - InstallProperties.
for Windows 8 and higher: HKEY_LOCAL_MACHINE - SOFTWARE - Microsoft - Windows - CurrentVersion - Installer - UserData - S-1-5-18 - Products - 7AB5E7046046FB044ACD63458B5F481C - InstallProperties.
3.
Find the ProductID line - this is the serial number
In connection with the transition to the new national standard for the formation and verification of electronic signatures GOST R 34.10-2012, we recommend that you update your CryptoPro CSP Licenses versions 3.6 and 3.9 in advance. to current ones, since these versions do not support the new national standard GOST R 34.10-2012, which is mandatory from January 1, 2019.
To check the need to update the CryptoPro CSP License, run the CryptoPro CSP program. To do this, go to “Start” -> “Programs” (or “All Programs”) -> “CRYPTO-PRO” -> “CryptoPro CSP”.
In the window that opens, select the “General” tab, pay attention to the product version and license expiration date:
If the version of the CryptoPro CSP program installed on your computer is 4.0 or 5.0, and the license validity period is “Permanent”, then everything is in order, you are ready to switch to a new cryptographic standard.
If the “Validity period” line indicates date or word "Expired", then you need to purchase a license and enter the serial number.
If in the “Validity period” line you see “Permanent”, but the version of CryptoPro CSP starts at 3.6... or 3.9..., then you need to purchase a License to update the version of CryptoPro CSP, update the program on your computer to the current version and enter serial number.
Entering the serial number depends on which certificate is used for the job. Since the end of April 2014, Kontur.Extern subscribers can be issued certificates with a built-in license. A sign that the license is built-in is the presence of the line “Limited Crypto-Pro License” on the “Composition” tab in the public key of the certificate (see).
If the certificate has an embedded license
The public key must be set to the private key (see instructions).
The workplace must have a version of Crypto-Pro no lower than 3.6 R2 (3.6.6497) installed. You can check the version of the crypto provider by opening the Start menu > Control Panel >
To work with such certificates, you do not need to have a valid workplace license.
If the certificate does not have a built-in license (you purchased a serial number for your workstation)
First of all, you should find the appendix to the agreement “License to use the CryptoPro CSP software product.” It will contain a serial number, which must be entered using one of the methods described below.
If This application is not available, you need to contact at the connection point. If you cannot find service center contacts, you should contact technical support at[email protected] , indicating the essence of the problem and the tax identification number and checkpoint of the organization.
You can enter the license serial number using the diagnostic portal or manually.
Entering a license through the diagnostic portal
- Go to the service at https://i.kontur.ru/csp-license.
- Click the “Next” button.
- After the verification is completed, select “Install”.
- After installing the components, enter the license number in the field and click Enter.
- The license has been entered and the validity period of the new license is indicated.
Manually entering a license
The procedure for manually entering a CryptoPro license depends on the installed version of the crypto provider. You can check the version of the crypto provider by opening the “Start” menu > “Control Panel” > “CryptoPro CSP”. The product version is listed on the General tab.
Below are the settings for the versions:
To enter a license for CryptoPro CSP version 3.6, you must complete the following steps:
1. Select the “Start” menu > “Control Panel” > “CryptoPro CSP” .
2. In the “CryptoPro CSP Properties” window, click on the “CryptoPro PKI” link.
In CryptoPro CSP 3.6 R3, the procedure for entering a license has been significantly simplified. Instead of the “CryptoPro PKI” link, click on the “Enter license” button and enter the serial number from the form in the window that opens. Click “Ok”, license entry is completed.
.png)
3. In the PKI console window, select the “License Management” item and expand it by clicking on the icon on the left. 
4. You need to right-click on the “CryptoPro CSP” item and select “All tasks” > “Enter serial number”.
5. In the window that opens, you must enter the serial number from the license form and click on the “Ok” button. 
To enter a license for CryptoPro CSP version 3.9, you must complete the following steps:
1. Select the “Start” menu > “Control Panel” > “CryptoPro CSP”.
To enter a license for CryptoPro CSP version 4.0, you must complete the following steps:
1. Select the “Start” menu > “Control Panel” > “CryptoPro CSP” .
2. In the “General” window, click on the “Enter license” button.
3. In the window that opens, you need to fill in the fields provided and click on the “Ok” button.
Cryptoprovider CryptoPro CSP is designed for:- authorization and ensuring the legal significance of electronic documents when exchanging them between users, through the use of procedures for generating and verifying an electronic digital signature (EDS) in accordance with domestic standards GOST R 34.10-94, GOST R 34.11-94, GOST R 34.10-2001;
- ensuring confidentiality and monitoring the integrity of information through its encryption and imitation protection, in accordance with GOST 28147-89; ensuring authenticity, confidentiality and impersonation protection of TLS connections;
- integrity control of system and application software to protect it from unauthorized changes or violation of correct functioning; management of key elements of the system in accordance with the regulations on protective equipment.
Key media for CryptoPro CSP
CryptoPro CSP can be used in conjunction with many key media, but most often the Windows registry, flash drives and tokens are used as key media.
The most secure and convenient key media that is used in conjunction with CryptoPro CSP,are tokens. They allow you to conveniently and securely store your electronic signature certificates. Tokens are designed in such a way that even if stolen, no one will be able to use your certificate.
Key media supported by CryptoPro CSP:- floppy disks 3.5";
- MPCOS-EMV processor cards and Russian smart cards (Oscar, RIK) using smart card readers that support the PC/SC protocol (GemPC Twin, Towitoko, Oberthur OCR126, etc.);
- Touch-Memory DS1993 - DS1996 tablets using Accord 4+ devices, Sobol electronic lock or Touch-Memory DALLAS tablet reader;
- electronic keys with USB interface;
- removable media with USB interface;
- Windows OS registry;
Digital signature certificate for CryptoPro CSP
CryptoPro CSP works correctly with all certificates issued in accordance with GOST requirements, and therefore with the majority of certificates issued by Certification Authorities in Russia.
In order to start using CryptoPro CSP, you will definitely need a digital signature certificate. If you have not yet purchased a digital signature certificate, we recommend that you do so.
Supported Windows Operating Systems
| CSP 3.6 | CSP 3.9 | CSP 4.0 | |
|---|---|---|---|
| Windows 10 | x86/x64 | x86/x64 | |
| Windows 2012 R2 | x64 | x64 | |
| Windows 8.1 | x86/x64 | x86/x64 | |
| Windows 2012 | x64 | x64 | x64 |
| Windows 8 | x86/x64 | x86/x64 | x86/x64 |
| Windows 2008 R2 | x64/iteanium | x64 | x64 |
| Windows 7 | x86/x64 | x86/x64 | x86/x64 |
| Windows 2008 | x86 / x64 / itanium | x86/x64 | x86/x64 |
| Windows Vista | x86/x64 | x86/x64 | x86/x64 |
| Windows 2003 R2 | x86 / x64 / itanium | x86/x64 | x86/x64 |
| Windows XP | x86/x64 | ||
| Windows 2003 | x86 / x64 / itanium | x86/x64 | x86/x64 |
| Windows 2000 | x86 |
Supported UNIX-like operating systems
| CSP 3.6 | CSP 3.9 | CSP 4.0 | |
|---|---|---|---|
| iOS 11 | ARM7 | ARM7 | |
| iOS 10 | ARM7 | ARM7 | |
| iOS 9 | ARM7 | ARM7 | |
| iOS 8 | ARM7 | ARM7 | |
| iOS 6/7 | ARM7 | ARM7 | ARM7 |
| iOS 4.2/4.3/5 | ARM7 |
|
|
| Mac OS X 10.12 | x64 | x64 | |
| Mac OS X 10.11 | x64 | x64 | |
| Mac OS X 10.10 | x64 | x64 | |
| Mac OS X 10.9 | x64 | x64 | |
| Mac OS X 10.8 | x64 | x64 | x64 |
| Mac OS X 10.7 | x64 | x64 | x64 |
| Mac OS X 10.6 | x86/x64 | x86/x64 |
|
| Android 3.2+ / 4 | ARM7 | ||
| Solaris 10/11 | x86/x64/sparc | x86/x64/sparc | x86/x64/sparc |
| Solaris 9 | x86/x64/sparc | ||
| Solaris 8 | |||
| AIX 5/6/7 | PowerPC | PowerPC | PowerPC |
| FreeBSD 10 | x86/x64 | x86/x64 | |
| FreeBSD 8/9 | x86/x64 | x86/x64 | x86/x64 |
| FreeBSD 7 | x86/x64 | ||
| FreeBSD 6 | x86 | ||
| FreeBSD 5 | |||
| LSB 4.0 | x86/x64 | x86/x64 | x86/x64 |
| LSB 3.0 / LSB 3.1 | x86/x64 | ||
| RHEL 7 | x64 | x64 | |
| RHEL 4 / 5 / 6 | x86/x64 | x86/x64 | x86/x64 |
| RHEL 3.3 spec. assembly | x86 | x86 | x86 |
| RedHat 7/9 | |||
| CentOS 7 | x86/x64 | x86/x64 | |
| CentOS 5/6 | x86/x64 | x86/x64 | x86/x64 |
| TD OS AIS FSSP of Russia (GosLinux) | x86/x64 | x86/x64 | x86/x64 |
| CentOS 4 | x86/x64 | ||
| Ubuntu 15.10 / 16.04 / 16.10 | x86/x64 | x86/x64 | |
| Ubuntu 14.04 | x86/x64 | x86/x64 | |
| Ubuntu 12.04 / 12.10 / 13.04 | x86/x64 | x86/x64 | |
| Ubuntu 10.10 / 11.04 / 11.10 | x86/x64 | x86/x64 | |
| Ubuntu 10.04 | x86/x64 | x86/x64 | x86/x64 |
| Ubuntu 8.04 | x86/x64 | ||
| Ubuntu 6.04 | x86/x64 | ||
| ALTLinux 7 | x86/x64 | x86/x64 | |
| ALTLinux 6 | x86/x64 | x86/x64 | x86/x64 |
| ALTLinux 4/5 | x86/x64 | ||
| Debian 9 | x86/x64 | x86/x64 | |
| Debian 8 | x86/x64 | x86/x64 | |
| Debian 7 | x86/x64 | x86/x64 | |
| Debian 6 | x86/x64 | x86/x64 | x86/x64 |
| Debian 4/5 | x86/x64 | ||
| Linpus Lite 1.3 | x86/x64 | x86/x64 | x86/x64 |
| Mandriva Server 5 Business Server 1 |
x86/x64 | x86/x64 | x86/x64 |
| Oracle Enterprise Linux 5/6 | x86/x64 | x86/x64 | x86/x64 |
| Open SUSE 12.2/12.3 | x86/x64 | x86/x64 | x86/x64 |
| SUSE Linux Enterprise 11 | x86/x64 | x86/x64 | x86/x64 |
| Linux Mint 18 | x86/x64 | x86/x64 | |
| Linux Mint 13 / 14 / 15 / 16 / 17 | x86/x64 | x86/x64 |
Supported Algorithms
| CSP 3.6 | CSP 3.9 | CSP 4.0 | |
|---|---|---|---|
| GOST R 34.10-2012 Creating a signature | 512 / 1024 bit | ||
| GOST R 34.10-2012 Signature verification | 512 / 1024 bit | ||
| GOST R 34.10-2001 Creating a signature | 512 bit | 512 bit | 512 bit |
| GOST R 34.10-2001 Signature verification | 512 bit | 512 bit | 512 bit |
| GOST R 34.10-94 Creating a signature | 1024 bit* | ||
| GOST R 34.10-94 Signature verification | 1024 bit* | ||
| GOST R 34.11-2012 | 256 / 512 bit | ||
| GOST R 34.11-94 | 256 bit | 256 bit | 256 bit |
| GOST 28147-89 | 256 bit | 256 bit | 256 bit |
* - up to version CryptoPro CSP 3.6 R2 (build 3.6.6497 dated 2010-08-13) inclusive.
CryptoPro CSP license terms
When purchasing CryptoPro CSP, you receive a serial number, which you need to enter during the installation or configuration process of the program. The validity period of the key depends on the selected license. CryptoPro CSP can be distributed in two versions: with an annual or perpetual license.
Having purchased perpetual license, you will receive a CryptoPro CSP key, the validity of which will not be limited. If you buy, you will receive a serial number CryptoPro CSP, which will be valid for a year after purchase.
