When you turn on the computer, it usually asks you to enter an access code. Protecting your account with a password is designed to prevent access to your confidential information for other users. However, if you are single user personal computer, constantly asking for a password when logging in will be more of a hindrance than a help.
This is an extra action, extra information that needs to be remembered, an increase in boot time when turning on the PC, and so on. Besides, if you forget it, you will get a lot of problems.
Therefore, for most users it is easier remove password entry for your account in Windows 10. This article is devoted to this issue.
Disabling a local account password
If you use a local account to log into Windows 10, cancel password entry simple enough. You can simply delete it.
To do this, do the following:
- Call up the menu " Start", using the Win key, or using the corresponding icon on the quick access panel.
- Open " Options" You can also call this interface using the key combination Win + I.
- Go to the section called "".
- Using the navigation menu on the left side of the window, go to the “ Login Options».
- In the column " Password» Click the Change button.
- Please enter the current access code for your account.
- Leave all fields blank and click Next to remove the check.
- If the OS asks you to reboot, do it.
Active the password will be removed immediately and will not be required to log into the Windows 10 operating system the next time you turn on your personal computer.
Alternative way to disable the request
If you don't like the settings menu that was introduced in Windows 10, you can remove the passcode using the usual control panels. The tool " Change».
Do the following:
- Click on the button " Search» in the Quick Access Toolbar.
- Enter« control Panel" fully or partially.
- Run found utility.
- Go to the "" category.
- Click on the hyperlink " Deleting user accounts».
- Select your account from the list provided.
- Click on the hyperlink " Change password».
- Enter a valid password, the remaining fields should be leave blank.
- Click " Change password» to save the settings.
As in the previous method, the password will be removed and you will not need to enter it the next time you log into Windows 10.
Disable the prompt for a Microsoft account
The methods described above allow you to get rid of the password check at login, but only when you work with local account. However, Windows 10 allows you to log in to the system using single Microsoft account. And it is no longer possible to remove the password from it. However, you can configure automatic entry of login information when starting this personal computer. This can be done in two different ways.
Account Settings
The first way to remove the check is simpler. However, unfortunately does not work on all computers. It is highly recommended that you try it first. And in case of failure, move on to the next point. To set up automatic entry without prompting, follow the instructions below:
In most cases, this is enough to log into the OS without asking for a password. However, if you were unable to remove the check, you will need to do manually editing the registry.
Registry changes
The registry stores data that Windows 10 uses to operate. By changing existing entries and creating new ones, users can seriously change the way the operating system works. Therefore, all changes must be made extremely carefully, since any error can lead to incorrect operation of the computer.
Before starting work in the Registry Editor, it is strongly recommended to create a system restore point. If something goes wrong, you can easily roll back to the saved version of Windows 10 without having to reinstall.
Registry Editor
To enter the editor, users will need to do the following:
- Call up the dialog " Execute" using Win + R.
- Type regedit and click OK.
- If the program requires administrator permission, click OK.
- On the left side of the editor there is a directory tree. Use it to find the directory HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon
Many users are interested in how to remove the password from a computer or laptop on Windows 8. In fact, it is not at all difficult, especially if you remember the login combination. But there are times when a user simply forgot the password for his account and cannot log in. So what should we do? Even from such seemingly difficult situations there is a way out, which we will talk about in our article.
If you remember your password to log into your account, then you should not have any problems resetting your password. In this case, there are several options for how to disable the password request when logging into a user account on a laptop; at the same time, we’ll look at how to remove the password for a Microsoft user.
Reset local password
Method 1: Disable password entry in “Settings”
Ready! Now you won't have to enter anything every time you log in.
Method 2: Reset your password using the Run window
Thus, we did not remove the password, but simply set up automatic login. That is, every time you log in, your account information will be requested, but it will be entered automatically and you won’t even notice it.
Disable your Microsoft account
Ready! Now re-login using your new account and you will no longer need to enter your password and log into your Microsoft account.
Reset your password if you have forgotten it
If the user has forgotten the password, then everything becomes more difficult. And if in the case when you used a Microsoft account when logging in, everything is not so bad, then many users may have difficulties resetting their local account password.
Reset local password
The main problem with this method is that this is the only solution to the problem and for it you need to have a bootable USB flash drive of your operating system, and in our case - Windows 8. And if you do have it, then this is great and you can start restoring access to the system.
Attention!
This method is not recommended by Microsoft, so you do everything you do at your own risk. You will also lose all personal information that was stored on the computer. Essentially, we will simply roll back the system to its original state
You can now log in to your new user account using your new password. Of course, this method is not easy, but users who have already encountered the console before should not have any problems.
Microsoft password reset
Attention!
This method of solving the problem requires an additional device from which you can access the Microsoft website.
Now, using the combination you just created, you can sign in to your Microsoft account on your computer.
We looked at 5 different ways to remove or reset your password in Windows 8 and 8.1. Now, if you have problems logging into your account, you will not be confused and will know what to do. Share this information with your friends and acquaintances, because not many people know what to do when a user has forgotten their password or is simply tired of entering it every time they log in.
When using a computer by one person or by users who trust each other, there is no need to use a password.
To log in automatically, do not skip entering the password (press the next button).
If you want to automate login to a PC with an already installed system, you need to know how to remove the password when logging into Windows 10.
It can be disabled using built-in administration tools, as well as special utilities. In addition, it is possible to use a small PIN code instead of a password.
Ensuring automation of system booting requires administrator rights, which are usually available on home equipment. If there are several users with different rights, then to adjust the order of their login, you must use admin privileges.
How to remove the password requirement in account settings
This is the standard method that applies to all releases of Windows.
To use it you need:
Then you will need to enter a login-password pair.
After entering them and clicking OK, the login parameters will be changed.
If you link a specific computer to a domain, you need to use registry editing.
How to remove password when logging into Windows 10 using the registry
This is a universal option that can be used on any computer with Win10. To automate the download, perform the following steps:
- Press Win+R, enter regedit in the field that opens and activate input.
- In the utility for working with the registry, click on the HKLM branch and sequentially open the sections Software - Microsoft - Windows NT - CurrentVersion - Winlogon.
- Double-right-click on the AutoAdminLogon line and set its value to one.
- If a domain name is used, then in the DefaultDomainName key you need to specify the domain/computer name (this value can be taken from the system properties).
If this parameter is missing, then it must be created by right-clicking on an empty space in the Winlogon field and selecting create a string parameter (String Value). - To change the name of the user whose account is loaded by default, adjust the DefaultUserName to the desired user (or leave the existing one) and write the DefaultPassword line, where the password corresponding to the login is inserted.
- Turn off the registry editor and reboot.
How to get rid of the sleep password
To deactivate this option, you need to click Start and activate “Settings”.
In accounts, go to the login parameters and adjust the value set in the section defining login requirements to “Never”.
A similar result can be obtained in power settings (via additional parameters options).
How to disable the wake-up password in the registry
You can remove the need for a password when activating the computer from sleep mode in the following way:
How to disable the wake-up password in local group policies
To use this method:
- Press Win+R, enter gpedit.msc and press enter.
- Click on the configuration templates, where you sequentially double-click on the system, power, and sleep mode folders.
- The specified settings are applied.
How to set up automatic login using programs
To automate login, it is not necessary to know how to remove the password when logging into Windows 10. There are quite a lot of service packages and utilities that allow you to implement this feature. One of the free official applications that are released by Microsoft, specifically designed for configuring login, is Autologon. It can be downloaded from the Microsoft website at
Do you want to remove the login window for entering your username and password? If you are sure that nothing threatens the security of your computer, you can disable the password entry window and configure Windows 10 to automatically boot to the desktop or start screen. The only advantage of not having to enter your login password is that it loads a few seconds faster and you don't have to remember your account password. So, here are a few options on how to remove the Windows 10 login password.
If you use multiple accounts on your computer, it is better not to enable passwordless login in Windows 10. Leave the password entry as default.
Way to disable password when booting windows 10 through user accounts
This will probably be the easiest way to disable the password when logging into Windows 10.
Step 1: Press the Win+R key combination to launch the command prompt window. In the input line, enter the Netplwiz command and click OK.
Launch the program launch window “Run”
Step 2: After starting Netplwiz, the User Accounts window will open. In the “Users” tab, you can configure user properties, add a new user, or delete a user. To disable the requirement to enter a username and password, you must uncheck the box (2). This option will enable login to Windows 10 without entering a password for all users. Click the "Apply" button.
Step 3: In the “Automatic login” window, you must confirm the deactivation by entering your account password twice and the “Ok” button.
Step 4: We check that there is no checkmark, which means the password was entered correctly and the function is disabled. Additionally, you can check by rebooting the system and making sure that the desktop has loaded.
Option for how to set up login to Windows 10 without a password through the registry
Try using this method only if the above did not work for some reason or if you want to use advanced methods of system management.
Step 1: First of all, launch the registry editor. To do this, press the Win+R key combination and in the Run window enter regedit.
Step 2: If you have User Account Control enabled, the system will ask you to confirm starting the Registry Editor program. We confirm and see the registry editor running. In the Registry Editor, go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon and find the name in the window on the right DefaultUserName, the value of which must match your login. There should be a variable in this section DefaultPassword. If the variable name is missing, you must create it. Right-click on a free field and click “Create -> String parameter”. Enter the name of the variable and enter your password.
Step 3: Now we can create a variable that will allow us to disable the Windows 10 password request. In the same way as in the previous step, we find the variable AutoAdminLogon, double-click with the left button and in the value field change the parameter from 0 to 1.
We reboot and make sure that you can now boot freely without having to enter a password.
Hi all!
The other day I was wondering how to remove Windows 10 login password. Initially, I didn’t have it, but at the same time, the loading of the dozens itself was not complete, but up to the welcome screen... Where you had to press the “log in” button from your account, and this was the first problem that bothered me a little. It’s as if, after clicking on the “login” button, the computer thought some more... Although, it’s not clear what to think!
It would start right away, and that’s all...)) We’ll do everything. Read to the end.
In general, okay. I initially came to terms with this problem! Click login and Windows starts without a password.
But, one day the other day... Once again, while working on the blog, I noticed some strange feature, or a glitch with the mouse.
The mouse cursor kept hovering on the screen, and at the same time the buttons reacted. And after a while, the cursor worked again as if nothing had happened. To understand the situation, this is a radio mouse, without a wire. Which, at the same time, turned itself off if you did not approach it for a long time. And then, when clicked, it starts again - it works... and the mouse indicator blinks, as it should. The problem with the mouse was repeated more and more often, until I bought 3 types of different batteries - it didn’t help. I bought another mouse - it didn’t help! But the problem turned out to be not in the mouse at all...
And in search of a solution, I accidentally came across a video from YouTube, where one gamer talked about a similar glitch in the top ten. And to fix it, you had to create an account in xbox microsoft (if you don’t already have one), and there in the settings disable one function related to mouse settings... (this problem is more relevant for gamers whose mouse slows down during the game or freezes)
Hmm... Just think about it! What does this have to do with the Windows 10 password and account?
The fact of the matter is that earlier, before logging into xbox, I did not have a password when starting windows itself. And when I created the account, it contacted my local computer, and now required a password upon boot:
It turns out that you can have 2 types of user. One local user, no password. And the other is from a microsoft account. You could have activated it in another way. For example, it worked for me via xbox.
Naturally, this whole thing was not satisfactory. It was enough that Windows loaded until the welcome screen appeared:
After that, you need to press the mouse button or spacebar. For the Windows 10 login screen to appear. And only after that, you had to enter your password and press login.
This, of course, is an unrealistically unnecessary action.
Some kind of headache when loading the computer. From whom, what to hide? Why encrypt like that? And the same thing happened when exiting sleep mode.
So! It was decided to deal with this situation and launch Windows directly to the desktop, bypassing the welcome screen and entering a password.
How to remove the password when logging into Windows 10 from sleep mode and when starting a computer or laptop?
After reading a little online about this, I found several solutions. And today I will share with you...
First of all, it was necessary to leave one account - one user under which we log into Windows 10. That is, local. And you can simply delete your Microsoft account so that it doesn’t interfere. Or switch from Microsoft to local. And why did I even need it?
or, here's another option...
Shown how to disable (remove) the password request when logging into Windows 10 on a laptop?
The video shows it specifically on a laptop, and about exiting sleep mode without a password.
Sequencing:
1. Type netplwiz in the search and run the command
2. User accounts will open
Here I left only one user (local, only myself). And I deleted all the others! At the same time, the group for the main user is - administrator. The point is to be one person in the Windows 10 system, as an administrator.
Click Apply and a window will pop up asking you to enter your old password. We just enter it and then check again to make sure the box is not checked. Click “apply” and “ok” again.
There is an opinion that at this point there is a small glitch in the top ten itself. And the checkmark may appear again after saving. So check it again!
By the way, about the glitch with a tick. He is really present. And if you log into user accounts again, the check mark will appear again. But it won’t take effect until we click OK. :
This helped me, but in addition I deleted my Microsoft account (see video below) and disabled the password request when resuming from sleep mode (read below).
At the stage when I left one user with Windows, which should already start without a password... When logging out of the system, or when exiting sleep mode, the password was shown.
You can easily check this by logging out of the system using the key combination win+L:
How to log out of the system, as if from sleep mode. Check if there is a password?
Press the key combination WIN+L:
And we log out of the system. We will immediately notice whether a password will be required or not.
If not, then congratulations! Everything is resolved, and when you exit the sleeper, the password is no longer required.
Windows 10. What to do and how to remove the password if it requires a password when exiting sleep mode?
In the video above, these points were discussed. Let's take a closer look, step by step.
1. In the search, enter “password”, then open “Login Options”
2. In the login options, select "NEVER".
This is the entry parameter, namely the exit from sleep mode. Windows explains it to us like this:
If you are away, how long should Windows require you to sign in again?
That's all!
Although you probably won't have such a function after you disable the user's password. As shown above. After all, if there is no password, then what to ask for)) . In any case, write below if you have any difficulties. We will try to help you!
To check, you can restart your computer. Or log out of the system using the key combination WIN+L, and it will no longer require a password. Just press the button and log in. And when the system boots when you turn on the computer, the password and welcome screen will not be requested at all, but the desktop will load immediately. Fast and convenient!
And lastly, this is a video about Microsoft Local Recording. Since there is not much information on this topic, I found a solution...
Microsoft account - how to disable it in Windows 10?
The topic was divided into 2 stages:
- First, the account is deleted from the computer itself.
- Deleted from the site itself (Microsoft server)
The first stage is shown in the first part of the video.
But the second stage, in more detail...
Instructions:
1. Go to the website https://account.microsoft.com
3. Then, on the SECURITY tab, you need to find the item ADDITIONAL SECURITY SETTINGS
4. And in the next steps, request a special code to verify the account that it belongs to you. Click - SEND CODE. The code arrives quickly, and we enter it in a special field, as shown below...
5. The fifth step, at the very bottom, after going to the next page (you may need to click the CONTINUE button), and then the item - “Closing your account”, which is at the very bottom of the screen. And select the link - “Close account”.
6. You will be warned again and told that the account will be permanently closed after 60 days. expectations. But that's not the point! Read the information in detail and click NEXT. As shown below...
That's all the stages. In fact, I wouldn’t have needed the last step if I hadn’t created a Microsoft account through xbox. So I had to deactivate it.
The most interesting thing is that the problem with the mouse was not entirely related to the xbox settings. Because this is more of a setting for gamers.
Well, oh well))… One event with a mouse forced me to look into another problem and write about it on the blog pages.
I found new ways for myself that speed up the operation of Windows 10, as well as how to quickly find suitable drivers for all computer devices so that they are free of system errors and conflicts. After all, problems associated with the top ten are periodically noticed. Especially when the processes in the system are heavily loaded.
I want to tell you everything. Write below how relevant is this for you to know?…
As for Windows being loaded with various processes and programs that can slow down its operation, this is not necessarily a problem with RAM. It is likely that the glitches are software related to . The same hard drive may produce errors that you are not aware of. Everything needs to be checked and corrected periodically.
In the next issues, there is something to talk about.
By the way, speaking about programs such as Photoshop or dreamweaver - they are also not bad at loading your system. Especially when you surf the Internet at the same time, and have 30 tabs open, and 3 more browsers are additionally launched to check client sites.
So it turns out that the system can be very heavily loaded with tasks, and Windows will cope, but somewhere the first problems will begin. And it’s especially bad when the computer freezes completely and you turn it off emergencyly. And then, after another failure, it may turn out that Windows will not start. Or something will break in the system again and you will need to re-enter your password.
In general, write below what is wrong with Windows 10. We will figure it out together.
If you found today's episode useful, please click like.
